Brewtus III is discontinued and replaced with the New Expobar Brewtus IV. Information herein for reference only.
Expobar Brewtus III-V Dual Boilers Espresso Machine, E61, Gicar PID
Expobar Brewtus III (V stands for Vibration pump version) dual Boiler Espresso machine is Barista's heaven. With Double boiler + PID design you'll be able able to get consistent god shots as often as possible.
2010 models comes with new Gicar PID with Blue led lights, higher grade polished Stainless Steel body and the new single hole Steam Tip as a standard.
The Brewtus 3 is an upgraded design of the Expobar Brewtus II with double boilers but now with Gicar PID and other improvements. Thanks to Expobar innovative approach and efficiency in manufacturing, the Brewtus lll is also relatively inexpensive. We simply get more than we pay for in comparison to any other semi automatic espresso machine in the market today. Moreover... Espresso consistency is better than ever with "in-water" PID temperature sensor in a dedicated "coffee only" boiler as oppose to outside the boiler pressurestat used in single HX boiler espresso machines.
We didn't know how to briefly describe what we believe is the best semi-automatic espresso machine on the market therefore we can only ask that you read the features and benefits of this machine below. The Brewtus III is no ordinary espresso machine, this is the kind that you buy once in a life time.
We've got the Expobar Brewtus III in 3 different configurations:
Expobar Brewtus III-V
Standard with Vibration pump & water tank, replaces the Expobar Brewtus II, now with Gicar PID.
Expobar Brewtus III-V Premium
Standard with Vibration pump, water tank plus direct water & drain connection ready.
Expobar Brewtus III-R
Rotary pump with direct water and drain connection, without water tank.
All Expobar Brewtus III comes with the following improvements over the Brewtus II: Gicar PID, Commercial grade dual gauges in black, heavy duty metal on/off switch (replacing the red plastic) and anti burn steam wand. (Anti burn steam wand also available exclusively in our 2010 Expobar Lever). Also, the Brewtus III-V is now equipped with heavy duty "normal" size rubber feet.
All a Barista dare to desire in his espresso wish list and much beyond standard commercial grade espresso machine is here in the Expobar Brewtus lll. Not one, but 2 Copper boilers, not one, but 2 gauges, not a standard HX boiler where temprature is controlled by pressure-stat but dedicated boiler with electronic Gicar PID user friendly temperature control. All these and more still in a beautiful design, Nickel plated E61 grouphead, dual layer steam wand and Super heavy Solid Stainless Steel body.
Yet, not another espresso machine... This one is built to last.
Simple to use, with the Brewtus III-V, just pull the E61 grouphead lever up and the brewing process starts. When finishing brewing your espresso with the Brewtus, just push the lever down. The lever action engage the pump when up and then the pressure relief valve when pulled back down.
Expobar Dual Boiler Brewtus III comes with commercial size 58 mm portafilter handle. It is made of chrome-plated high density brass that contributes to the thermal stability. Included with the handle are two filter baskets for one and two espresso shots. A 58mm E61 Naked Bottomless portafilter is available.
E61 grouphead is a desirable feature that you can find in the Expobar lever espresso machines and more expensive commercial espresso makers. It is made of high density solid brass (about 9Lbs!) and beautifully chrome platted, polished to perfection. This grouphead is always hot and ready for brewing due to it's thermosyphonic circulation system that circle hot water continuously between the grouphead and the boiler for better thermal stability. With the added PID in Brewtus machines, temperature stability and control is easier than ever.
Two, double boilers with automatic refill allow you to brew and steam at the same time, there is no waiting time between brewing espresso and steaming milk. Each Boiler is 1.7 Liters in volume and has its own 975 watts heating element set to work at optimum temperature. Since both have automatic water refill there is no wait time between one espresso shot to another.
Brewtus 3, once on, is always ready to make any coffee with no delays or any wait time thanks to its quick temperature recovery system.
Gicar PID is now included in all Expobar Brewtus espresso machines models. The temperature control is located on the left side of the machine. It contributes to highest precision of water temperature and stability adjustable at your finger tips. Programming is made by using the arrow up or down to set your preferred brewing temperature to an accuracy of 1 degree Celsius. The new PID controls the water temperature inside the boiler in extreme consistency by commanding the heating element of any fluctuations as low as under 1 degree Celsius, therefore, standard boiler temperature variances do not occur as with typical thermostats.
Boiler gauge and steam pressure gauge with ready light are located on the right side of the espresso machine, let you know when the machine is ready to brew coffee or steam milk. You can control the brewing pressure with a small knob hiding behind the drip tray. This feature is exclusive for the Brewtus lll.
Automatic Boiler Refill is a smart probe that sense the boiler water level. When the water level goes low in the Expobar Brewtus III, it send a signal to the pump to fill water into the boiler until it reach its optimal water level.
The Brewtus 3 has a manual pressure relief valve. The lever to the right if the E61 grouphead controls the valve. Pulling it up starts the brew process, pulling down stops the brew process. Once stopped, Expobar's manual pressure relief valve opens and release pressure from the grouphead and the portafilter handle to the tray. The pressure relief dries the used ground coffee in the portafilter handle so its packed nicely into a cookie shape, easier to knock it out.
The Expobar E61 Grouphead has a pre infusion feature. It creates uniform extraction of the ground coffee in the portafilter handle, resulting in maximum aroma.
A water tank sensor is located under the water reservoir in Brewtus III-V. It engaged when the water level in the water tank is too low by sensing the water weight. Once it senses low water level, it turns off the machine, protecting your Brewtus III.
One water filter /softener is included with the machine, located in the water tank. We offer annual supply of high quality water softeners for use with Expobar Espresso makers at a discount. Water quality and scale removal is important not only for best coffee taste but also protects your expensive espresso machine.
Water connection / plumb in feature is optional with the Expobar Brewtus III-R and Brewtus III-V Plus espresso machines. However, keep in mind that the Brewtus III-V has a very large water tank with 2.7 Liters capacity. It is more than enough for average home user daily consumption even for entertaining. Water connection may require some alterations and flow control of your household water pressure. In addition it is recommended to add Water Softener or Filtered water System to your water supply lines.
Expobar Brewtus III has a unique feature that you can not find in similar espresso makers in the same price range. Dedicated 2nd 1.7L boiler just for steaming. This feature guarantee high steam power, continuous any time all the time. The other boiler is ready to pull espresso shots accurately one after the other thanks to its PID control.
Separate stainless steel wands for hot water and one for steaming or frothing milk.
Swivel base with anti burn dual layer insulation wand for steaming milk, comes standard with latest single hole steam tip.
Special Features & Convenience:
Removable cup warmer is located on the top of the espresso machine. It is ideal for keeping your cups warm and easy to remove for cleaning or to refill the water tank.
2.7-2.9L of water tank capacity can produce about 85 espresso cups. It is also removable for easy cleaning.
The body of the Expobar Brewtus lll is made of polished stainless steel. It is very heavy and massive espresso maker.
Dimensions: Height, Width and depth in 38 x 26.7 x 44.5 cm, (W 10.5" x H 15" x D 17.5")
Weight: 29.5 kgs.
Maintenance, info and other cool stuff:
Zcafe "Easy" Price Match + Guarantee.
Barista Gear and Maintenance items - Naked portafilter, shot glass, Resin water filters and more.
E61 Espresso Machines - BackFlushing Instructions: - Expobar back flushing how to.
Black Cat Coffee - Checkout our most sought after Black Cat gourmet espresso blends.
Use 3 way Water filter softener for best trouble free performance for many years.
Expobar - Red Carpet Service and Support.